Pages

Showing posts with label clay finishes. Show all posts
Showing posts with label clay finishes. Show all posts

Friday, August 31, 2018

Review: PADICO Sealers

It's been a while since I did a crafting related review of any kind! Usually I'm the type to stick to one kind of product because I'm lazy and I don't want to waste my money anymore by buying something and trying it out, only to find that it doesn't perform how I want it to... You can read about my previous reviews on clay finishes under the tag here.(Where all said badly performing products mentioned are still with me in storage lol). This is a review for Padico's Sealers in Super Gloss and Matte.

I know by now I should be investing in a UV lamp and resin, but I'm not quite at that stage yet! I've been using Sculpey Glaze since forever because it's readily available, it provides the glossy coat I want, and it doesn't dry tacky (under dry air conditions). However, it adheres weakly to clay and I find that it doesn't really protect it when the piece gets banged against a hard surface.

I'm sure these Padico products are not new but I came across them while randomly searching for finishes because my Sculpey Glaze was running out and I was fed up and decided to try something new! The downside here is that I wouldn't be able to easily buy this in a store but it actually got to me pretty quickly from Hong Kong. I purchased these online from this store and even with the markup in price, it ended up more or less the same price for the same volume (only if I used a Michael's coupon for the glaze, otherwise this is cheaper). 

I usually opt for glossy finish so this is my first time trying a matte one. I can't say I'm familiar with other matte finishes but this one on my cookie cat pendant looks pretty good. However, it gives the piece an eggshell-like feeling/coating and another bad point is that when scratched, it is quite obvious. I was going to use this for my future bakery items but now I am not so keen on it, especially for items that go through a lot of wear, like charms and pins.

The gloss finish is very shiny and the label (in Japanese, another downside, but I could Google translate) reads that you need to mix before application and you would need 1-3 coats. Can't say much about durability yet but so far even with this recent humidity and heat we've been having, the outcome is very smooth and 100% non-tacky! So far so good...! Both formulas are cloudy and dry to a clear finish. I'm pleased with the results and will probably stick to this sealer permanently.

That's all for this review... FYI, I am not sponsored by that Etsy store or Padico in any way. Actually, one thing I did notice was that the Matte sealer amount in the bottle was a lot less than the Super Gloss one (you can tell a little from the photo) when I received it. I messaged the seller and they told me it hadn't been opened before... but unless the product evaporates or something I have a feeling they might've cheated me. Sadly, I can't buy directly from the Padico official website because they don't seem to ship to my location. Oh well ...that's all for this review. Thanks for reading! :) 
--------
EDIT: 08/18/2019: I don't recommend using this on polymer clay AT ALL because after a while in storage, the gloss varnish tends to get tacky and particularly on things made with black polymer clay, it forms bubbles. I feel like polymer clay needs to "breathe" and this isn't the right medium for it...  the matte varnish is better, but it too does become tacky and attracts a lot of dust after a while. I've had to re-coat my pieces with Sculpey glaze but doesn't help and doesn't perform as well as Sculpey glaze for some reason. Really disappointed! Perhaps this will be more suited for air dry clay or resin clay. This is a lesson that you should do a shelf life test on some scrap clay before glazing the real thing... I guess I got a little ahead of myself because I was so excited to try these!!

Friday, November 2, 2012

Review: Varathane & TripleThick + WIP

I finally got my hands on some Varathane from the hardware store. I'm not quite sure if this is the exact one that polymer clay artists have been using (since I've heard that the product/company underwent some changes) but I've read that the water-based one is the one to get so I think this is it. This stuff is apparently used for outdoor wood surfaces so I have a feeling it's pretty heavy duty stuff... since I'm only using it as a finish for clay charms. o.O

The reason why I turned to Varathane was because I was having trouble with TripleThick (blogged before here), but lately I haven't been having those problems anymore. o_o A few of my charms felt sticky and tacky to the touch (though the glaze was perfectly fine and flawlessly glossy) I think it was heavily due to humidity and moisture levels in the air (since it was the summertime). I think the best time of year to make charms would be in the fall-winter because the air is more dry.

Varathane looks like it will protect charms against the wear that's associated with being handled often, but I am in the process of testing that out still. So far here are the points I've noted:

Pros for TripleThick:
-screw on lid
-the finish is super glossy and shiny
-great for glazing things like fruits
-usually one coat is enough

Cons for TripleThick:
-bad odor
-not ideal for covering large surfaces because of obvious brushstrokes due to its viscosity
-very thick 

I tried painting my charms (unpainted) directly with Varathane and noticed that it had trouble adhering to the surface, it receded like water does on plastic. But it works great on painted clay surfaces.

Pros for Varathane:
-low odor
-watery and less thick

Cons for Varathane:
-lid can be troublesome
-does not adhere to unpainted clay surfaces
-finish is glossy but not as shiny as TripleThick
-often need more than one coating

TripleThick and Varathane both cost the same (unless you get a Michael's coupon for the TripleThick) for the same amounts (Varathane has one more ml). They both appear milky white but dries clear. But because I like to both paint my charms and also use coloured clay, I need to use both of these products, and to me one is not better than the other. There is still no "miracle product" that I can use for everything, but so far I'm happy with the results.

When using Varathane to coat painted charms, a good way to get rid of brush strokes is the dipping method. The container is big enough for me to dip the charms in, so I use some bended wire along with my roughly assembled drying rack (composed of a stick with wire hooks wrapped about it, held up between two paint bottles lol)
Varathane is thin enough to use the dipping method several times for more coats. But one thing you have to keep an eye out for are little air bubbles, I pop them with a toothpick/needle the moment I see one.


A sample photo of some of the Katamari cousin charms I've been making. I've been starting a lot of random projects lately but I haven't been posting much ^^; But I am happy with how those charms turned out because I've been wanting to make smaller charm versions of the Katamari keychains I made two years ago. Somehow I never seem to tire of Katamari lol... I just think the characters are so cute. :3

I'm still catching up on making the Halloween stuff (yes, in November) that I was supposed to have finished ages ago but got sidetracked >__< I get sidetracked a lot when making things, I've noticed. I keep hoarding a bunch of supplies but nothing is truly "finished"...-.- There are lots of things I want to try, like working with resin, wood and even laser cut acrylic too, but I guess I can only do so much at one time!

Hope you enjoyed this post. Have a lovely weekend :)

Saturday, May 5, 2012

Gloss finishes for polymer clay

I realized that I have accumulated quite a lot of finishes over the years and recently I bought some Triple Thick to try since my Sculpey Glaze keeps drying out on me, so I decided to compile a mini review of sorts. ^^ I am not an expert but this is what I've tried and perhaps it will be of some use to those out there who are beginners to polymer clay (Sculpey/Fimo/Premo, etc..)

Of course, there is nothing wrong with polymer clay without a finish. But if your piece is painted, it helps to prevent paint from chipping off and also protects against dirt and general wear. This post is mainly about gloss finishes because I prefer gloss (I like things shiny). And, because I have yet to know of a good product that gives a completely matte, non-tacky finish...


From left to right:

ModPodge - The reason I have this was because the very first time I went to buy supplies for charm-making, I couldn't find any glaze and didn't know what to look for so I asked the sales girl at Michael's...and she gave me this. I do NOT recommend ModPodge for use as a gloss. It's pretty much a watered down glue and gets quite sticky when dried

Liquitex Gloss Varnish - I use this for faceups. I don't recommend this for clay use. The consistency is like water and it looks quite shiny as you use it. But as it dries, it loses that brilliant shine and dries to a sort of semi-gloss, almost satin finish. It is also somewhat tacky when dried.

Delta Ceramcoat Gloss Interior Varnish - This is quite old and I haven't actually used this on clay, but I got this because I bought the Delta Ceramcoat Sealer for wood. The varnish is very watery and is pretty much... useless. lol

TripleThick - I found out about this at FanExpo last year from a girl who was selling these charms in the Artist Alley that had this brilliant shine on them--they almost looked like fired ceramic, it was that shiny and looked so durable! The consistency is very thick (comparable to month old Sculpey Glaze) and milky but dries clear. It dries to a smooth, non-tacky finish. So far I like it, however the drying time is a lot longer than Sculpey Glaze (below) and the humidity levels also influences the drying time. What I like about it is that it comes in a big container and hopefully it'll last me quite some time.

Sculpey Glaze (Old and New) - I have been using this Glaze for years up until recently, and I guess I like that it dries super shiny and is also non-tacky. However, what I find annoying is that it is quite pricey for the amount and it tends to dry out rather quickly. You can dilute it with water, and that's what I've been doing. But as you dilute it more and more, it loses some of the shininess and I had the problem of the glaze actually peeling off rather easily from the clay--as in, it was just like a glue that didn't seem to adhere properly to the clay surface! x_x I've heard that they changed their formula, too. With the new packaging, you get about 3mL less than the old one. The price is still the same. I've always been tempted to try the "Satin" finish of Sculpey Glaze, but now I don't think it's worth it!

What I've heard a lot of polymer clay artists use is Varathane. I've seen it at the hardware store and to be honest what put me off was that it seems more toxic than the finishes I've used thus far. However, if TripleThick is having problems for me...then I might very well be trying this next.

These are just my personal opinions and experiences with these products that I wanted to share. There are a lot more resources about this topic found through Google! Thanks for reading! :)